DongGuan cnauto automation equipment Co Ltd
position:home > valve
  • Red glue dispensing valve

    field.writer/ :2020-06-28 Clicks:84

    Red glue is a conventional type of glue, which is mainly used in circuit board dispensing. However, special dispensing valve is required due to the characteristics of glue. Our company has developed and manufactured a dispensing valve that meets the requi...

  • Power filling valve

    field.writer/ :2020-06-23 Clicks:119

    Brief introduction: a power supply glue filling valve is made to meet the glue demand of power supply glue filling, which is specially designed to meet the two-component power supply glue filling valve. Its function is to control the effect. According to ...

  • Installation steps of mixing pressure barrel

    field.writer/ :2020-06-12 Clicks:118

    In order to ensure that the pressure bucket can be transported to the customer's hands without being damaged, it is generally not equipped with accessories to avoid being hit and crooked. Many customers will not be able to assemble the pressure bucket aft...

  • Photosensitive dispensing valve

    field.writer/ :2020-06-12 Clicks:209

    Brief introduction: photosensitive glue dispensing may be rarely understood. In fact, its another name for UV glue. Its called according to the characteristics of glue. UV light is needed for UV glue to solidify. Otherwise, it will not solidify in the dar...

  • 8 small round port mixing pipes

    field.writer/ :2020-05-29 Clicks:148

    There are many types of mixing pipe, including static mixing pipe and dynamic mixing pipe, among which there are many classifications, Ma, MB, MC, GSM, Mr, MS, RS, square and circular. There are many types. Today, I will talk about a special mixing pipe, ...

  • High precision dispensing controller

    field.writer/ :2020-05-28 Clicks:209

    Function: digital technology is adopted to digitize all dispensing parameters, so as to facilitate manufacturers to observe parameter change curve, adjust dispensing control field and strengthen dispensing effect. The parameters set by the high-precision ...

  • Precision Piezoelectric injection valve

    field.writer/ :2020-05-26 Clicks:126

    Piezoelectric spray valve is generally the top type of dispensing valve. It uses the way of impact pin to dispense glue. It can eject glue in the way of spraying, so that glue can be ejected at a fast speed. There is no need to configure a needle at the r...

  • valve

    field.writer/ :2020-05-23 Clicks:193

    In fact, the dispensing valve industry belongs to the middle and late stage, and the dispensing technology alone has been relatively mature. Now it is carried out in the way of assembly line, which can solve the problem of slow manual operation. The autom...